Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- modellingcomponents:elements:eventsandphases [2021/09/06 09:04] – [<Phase>] oliver
+++ modellingcomponents:elements:eventsandphases [2021/09/27 16:47] (aktuell) – [<Phase>] oliver
@@ Zeile 21: / Zeile 21: @@
 ^ minvalue | -Double.MAX_VALUE| The timeserie defined by the value attribute is tested, if it contains a value lower than the value of this attribute. If this is the case the complete phase is excluded. This attribute is respected only, if the process-flag is set to "post". | No |
 ^ minwidth | 0 | Only phases with more than "minwidth" frames are created. Phases with less frames are ignored. Be careful: The atttribute must define an integer value.| No |
-^ maxwidth | Integer.MAX_VALLUE | Only phases with less than maxwidth frames are created. Phases with more frames are ignored. Be carefule: The attribute must define an integer value.| No |
+^ maxwidth | Integer.MAX_VALUE | Only phases with less than maxwidth frames are created. Phases with more frames are ignored. Be carefule: The attribute must define an integer value.| No |
 ^ expectedPhasesCount | -1 | Defines the expected count of phases which should be created. If the created count does not fit the number defined by this attribute a warning is written. | No |
+^ invert | false | If set to true a new set of phases is returnded in the areas of no phases. | No |
@@ Zeile 33: / Zeile 34: @@
 ^ Name ^ Description ^
-^ <name>Global | if the attributes startEventType != null and endEventType != null or phaseTypeName != null, than corresponding phases with this name are created and the condition that only frames which are included in these phases are used. |
+^ <name>Global | If the attributes startEventType != null and endEventType != null or phaseTypeName != null, than corresponding phases with this name are created and the condition that only frames which are included in these phases are used. |
 **Examples**
@@ Zeile 79: / Zeile 80: @@
 ^ process | post | Only postprocessing is supported. Preprocessing und process step by step are not yet implemented.| No |
 ^ tolerance | | If set local maxima/minima are determined by first creating phases with values between global min/max and min*(1+tolerance/100) or max*(1-tolerance/100) | No |
-^ phase | | better use tolerance instead if possible Phase type name which defines phases, for each the event is set. | No |
+^ phase | | Used only, if the attribute "tolerance" is not set. Better use tolerance instead if possible Phase type name which defines phases, for each the event is set. | No |
 ^ value | | Used from methods "frame", "value" and "percent". In the first case it must be an integer value, in the second and third case a double. | No |
 ^ event | | A new event is created at the position of the given event moved about a given number of frames. | No |
+^ minthreshold | not used | Used in combination with the methods "min", "max", "minvelocity" and "maxvelocity". If the minimum threshold is not reached no event is created | No |
+^ maxthreshold | not used | Used in combination with the methods "min", "max", "minvelocity" and "maxvelocity". If the maxium threshold is not reached no event is created | No |
 ** Methods **
@@ Zeile 90: / Zeile 93: @@
 ^ frame | The attribute "value" must be set to an integer between 0 (inclusive) and trial length (exclusive). The attributes "tolerance" and "phase" are not set. | Creates an event at the given position. |
 ^ value | The attribute "phase" must be set. | Create events for each phase of the given type at positions where the given timeserie has the smallest difference to the value given by the "value"-attribute. |
-^ min  | | In a first step the global minimum or the minimum in the given phases, of the given timeseries is determined. Than phases are created in the range of [minimum; minimum*(1+percentTolerance/100)]. Last, for each of these phases an event is created at the position, where the timeseries reaches its minimum.|
+^ min  | Ether the attribute "phase" or the attribute "tolerance" ist set. | In a first step the global minimum or the minimum in the given phases, of the given timeseries is determined. Than phases are created in the range of [minimum; minimum*(1+percentTolerance/100)]. Last, for each of these phases an event is created at the position, where the timeseries reaches its minimum.|
-^ max  | | In a first step the global maximum or the maximum in the given phases, of the given timeseries is determined. Than phases are created in the range of [maximum*(1-percentTolerance/100); maximum]. Last, for each of these phases an event is created at the position, where the timeseries reaches its maximum. |
+^ max  | Ether the attribute "phase" or the attribute "tolerance" ist set. | In a first step the global maximum or the maximum in the given phases, of the given timeseries is determined. Than phases are created in the range of [maximum*(1-percentTolerance/100); maximum]. Last, for each of these phases an event is created at the position, where the timeseries reaches its maximum. |
-^ minvelocity  | Attribute "phase" is set. | Same as with method "min", based on the derivative of the given timeserie. |
+^ minvelocity  | Ether the attribute "phase" or the attribute "tolerance" ist set. | Same as with method "min", based on the derivative of the given timeserie. |
-^ maxvelocity  | Attribute "phase" is set. | Same as with method "max, based on the derivative of the given timeserie.|
+^ maxvelocity  | Ether the attribute "phase" or the attribute "tolerance" ist set. | Same as with method "max, based on the derivative of the given timeserie.|
+^ maxabsvelocity  | Ether the attribute "phase" or the attribute "tolerance" ist set. | Same as with method "maxvelocity". Only the abs values of the diff trajectory are calculated before. |
 ^ start | Attribute "phase" is set.| Creates an event at the start of the given phase.|
 ^ end   | Attribute "phase" is set.| Creates an event at the end of the given phase. |
@@ Zeile 104: / Zeile 108: @@
 ^ Name ^ Type ^ Description ^
-^ <name>Intervals | phase | Phases defined around the trial maximum plus/minus a given tolerance value. |
 ^ <name> | event | In each determined phase an event is created at position with max or min value as configured by the method attribute. |
+^ <name> | phase | Phases created to define areas between given tolerance values |
 **Examples**